A-B 6176M-17PT

将我们的 FLEX? I/O 平台的优点和本安技术结合在一起。这允许您通过单一或冗余光纤或同轴电缆将 I/O 分布在危险区域各处，几乎消除了单独的本安隔栅器和隔离器、防护罩、长接线运行以及电缆槽。FLEX Ex I/O 通过 ControlNet? 网络与您的控制系统进行通信。它与标准 FLEX I/O 和通信模块兼容，可提高网络选择和系统配置的灵活性。

特性无需防爆柜即可安装到危险区域（1 区）中 

使用 ControlNet? Ex 产品在危险区域中提供基于 ControlNet 的解决方案 

由于具有模块化设计，您可以独立选择 I/O、端子类型和网络接口 

无需工具即可进行组装 — 所有组件均可卡到 DIN 导轨上，并插接在一起以构成 I/O 系统 

水平或垂直安装在标准 DIN 导轨上 

通过带电插拔 (RIUP)，可在系统运行期间在危险区域中更换模块和进行连接 

简化的工程图纸、文档和站认证速度调试 

产品

1797 FLEX Ex? I/O 通信接口

在 FLEX Ex I/O 模块与背板以及 ControlNet 网络之间提供接口 

卡到 DIN 导轨上 

1797 FLEX Ex I/O 端子座

I/O 模块可插到端子座中 

为 I/O 模块提供端子连接点 

卡到 DIN 导轨上 

端子座相互插入以构成背板 

1797 FLEX Ex I/O 模块

提供本安 I/O 电路 

插到 DIN 导轨上的端子座中 

在组件中连接最多 8 个 I/O 模块 

1797 FLEX Ex 电源

Will our FLEX? The advantages of the I/O platform are combined with intrinsic safety technology. This allows you to distribute I/O throughout hazardous areas through single or redundant fiber optic or coaxial cables, almost eliminating individual intrinsic safety barriers and isolators, protective covers, long wire runs, and cable trays. FLEX Ex I/O via ControlNet? The network communicates with your control system. It is compatible with standard FLEX I/O and communication modules, improving flexibility in network selection and system configuration.

characteristic

Can be installed in hazardous areas (Zone 1) without the need for explosion-proof cabinets

Using ControlNet? Ex products provide ControlNet based solutions in hazardous areas

Due to its modular design, you can independently choose I/O, terminal type, and network interface

No tools required for assembly - all components can be clamped onto DIN rails and plugged together to form an I/O system

Horizontal or vertical installation on standard DIN rails

Through RIUP, modules can be replaced and connected in hazardous areas during system operation

Simplified engineering drawings, documents, and station certification speed debugging

product

1797 FLEX Ex? I/O communication interface

Provide interfaces between FLEX Ex I/O modules, backplanes, and ControlNet networks

Snap onto DIN rail

1797 FLEX Ex I/O Terminal Block

I/O modules can be plugged into terminal blocks

Provide terminal connection points for I/O modules

Snap onto DIN rail

Terminal blocks are inserted into each other to form a backplane

1797 FLEX Ex I/O Module

Provide intrinsic safety I/O circuits

Insert into the terminal block on the DIN rail

Connect up to 8 I/O modules in the component

1797 FLEX Ex power supply