GE DS200SDCIG2AHB是PACSystems RX7i平台的一部分，是一款电源模块。它提供+5伏直流电、+12伏直流电和-12伏直流电，并发送逻辑电平序列信号到背板上的模块。该模块插入主机架的插槽0，在保持输出功率的同时，可能会丢失一个交流输入线路周期。它具有过流和过压故障保护，能在0至60°C的环境温度下运行，允许100瓦的总输出功率，无需强制空气冷却。它的输出电压如下：+5 VDC输出至60安培，+12 VDC输出至12安培，以及-12 VDC输出至4安培。另外，它还具有85至264伏交流电或100至150伏直流电的宽范围输入电压，并具有交流操作功率因数校正和简易滑入式机架安装结构。它的额定输出功率为350瓦，最大输出功率可达500瓦。

GE IC698PSA350 is part of the PACSystems RX7i platform and is a power module. It provides+5 V DC,+12 V DC, and -12 V DC, and sends logical level sequence signals to modules on the backplane. This module is inserted into slot 0 of the mainframe, which may lose one AC input line cycle while maintaining output power. It has overcurrent and overvoltage fault protection and can operate in ambient temperatures ranging from 0 to 60 ° C, allowing a total output power of 100 watts without the need for forced air cooling. Its output voltage is as follows:+5 VDC output to 60 amperes,+12 VDC output to 12 amperes, and -12 VDC output to 4 amperes. In addition, it also has a wide range of input voltages ranging from 85 to 264 volts AC or 100 to 150 volts DC, as well as AC operated power factor correction and a simple sliding in rack mounting structure. Its rated output power is 350 watts, with a maximum output power of up to 500 watts.